Choosing the Right Fibre Distribution Cable for Your Network Deployment
Fibre cable selection is influenced by the network design, installation method, required fibre capacity and the physical route itself. Telenco UK supplies fibre distribution cable for all applications, whether you're deploying aerially, pulling into ducts or blowing cable into duct infrastructure.
ULW Fibre Cable
Lightweight fibre distribution cable with robust outside plant constructionTelenco Ultra-Lightweight (ULW) fibre cable combines low cable weight with the mechanical and environmental performance required across fibre distribution infrastructure.
The 96F construction uses bend-insensitive G.657A1 single-mode fibre, gel-filled micromodules, water-blocking elements, embedded strength members and an HDPE outer sheath.
- 96F fibre configuration
- G.657A1 single-mode fibre
- 7 mm nominal cable diameter
- 35 kg/km nominal cable weight
- Water-blocked construction
- HDPE outer sheath
- Ultra-lightweight construction
- PIA approved and tested
Duct Fibre Cable
Robust fibre cable available across a wide range of fibre countsTelenco duct cable provides a robust loose tube construction for fibre distribution networks and is available across a broad range of fibre counts to suit different network capacity requirements.
The cable combines G.657A1 single-mode fibre with gel-filled water-blocked loose tubes, an FRP central strength member, water-swellable protection and an HDPE external sheath.
- 12FO to 288FO options
- G.657A1 single-mode fibre
- Loose tube construction
- Gel-filled water-blocked tubes
- FRP central strength member
- Water-swellable protection
- HDPE external sheath
- Multiple fibre-count options
Blown Fibre Cable
Compact fibre cable for efficient blown installationTelenco blown fibre cable combines high fibre capacity with a compact cable construction, allowing efficient installation where cable diameter, available duct space and fibre density are important considerations.
Blown cable is not limited to microduct networks. It can be blown into suitable duct infrastructure where the cable and installation system have been selected appropriately for the route.
- High fibre capacity
- 48FO to 288FO configurations
- G.657A1 single-mode fibre
- Compact cable construction
- Water-blocked loose tubes
- HDPE outer sheath
- Suitable for blown installation
- Suitable for PIA applications
Fibre Distribution Cable for Every Deployment Method
Telenco UK supplies fibre distribution cable for all applications, whether you're deploying aerially, pulling into ducts or blowing cable into duct infrastructure. Rather than treating each cable family as suitable for only one type of network, cable selection should consider the full combination of route conditions, fibre count, cable construction, diameter, mechanical performance and installation method.
Our range includes ULW fibre cable, loose tube duct cable and compact blown fibre cable across different fibre capacities. Selected cables are held in UK stock and ready for next-day dispatch, with website pricing displayed per metre and various cable lengths available.
Fibre Cable Priced Per Metre
Fibre cable requirements vary considerably between projects, which is why Telenco UK displays cable pricing on a per-metre basis. This provides a clear and consistent way to compare cable options and calculate project requirements. Cable is supplied in available lengths rather than being cut and sold by the individual metre.
Start with the Route, Not Just the Cable Name
Choosing fibre distribution cable is not simply a case of matching an overhead cable to an aerial network or a blown cable to a microduct. The installation method is only one part of the decision.
Network designers and installers should also consider fibre count, cable diameter, tensile performance, bend radius, environmental protection, available duct capacity and any infrastructure-specific requirements.
Looking at these factors together makes it easier to select a cable construction that supports both the immediate installation and the longer-term requirements of the network.
Lightweight Construction Without Compromising Fibre Capacity
Ultra-Lightweight fibre cable provides a useful option where reducing cable mass and overall diameter is important. Telenco's 96F ULW cable combines a nominal 7 mm diameter with a nominal cable weight of 35 kg/km.
The cable uses G.657A1 bend-insensitive fibre alongside gel-filled micromodules, water-swellable elements and embedded strength members. This balances a lightweight profile with the physical protection required for outside plant fibre infrastructure.
Fibre Capacity and Mechanical Protection
Loose tube fibre cable remains a highly versatile construction for distribution networks. Telenco duct cable is available across fibre counts including 12FO, 36FO, 48FO, 72FO, 96FO, 144FO and 288FO.
Gel-filled water-blocked loose tubes surround the central strength structure, while water-swellable elements and an HDPE outer sheath provide additional environmental protection.
The broad range of fibre counts means the cable can be matched more closely to network capacity requirements rather than using a single construction across every route.
Compact Cable for Efficient Duct Installation
Blown fibre cable is designed around compact dimensions and efficient installation. While often associated with microduct systems, blown cable can also be installed into suitable conventional duct infrastructure.
Telenco's high-density blown cable range includes configurations up to 288FO, combining substantial fibre capacity with a reduced cable profile.
This makes cable diameter, duct size, installation distance and blowing equipment important parts of the overall system design rather than considering the cable in isolation.
Key Considerations When Selecting Fibre Distribution Cable
Find the Right Fibre Distribution Cable for Your Project
Whether you're deploying aerially, pulling cable into ducts or using a blown installation method, Telenco UK can help you select the appropriate fibre cable for your network. Explore our ULW, duct and blown cable ranges online or speak with our team about your project requirements.
